pj1117 1 amp low dropout positive voltage regulator 1-6 2003/03.rev.b to-252 to-263 s ot-223 he pj1117 series are high performance positive voltage regulators designed for use in applications requiring low dropout performance at full ra ted current, additionally, the pj1117 series provides excellent regulation over variations due to changes in line, load and temperature. outstanding features include low dropout performance at rated current, fast transient response. the pj1117 series are three terminal regulators with fixed and adjustable voltage options available in popular packages. z low dropout performance 1.3 v max. z full current rating over line and temperature z fast transient response z 2%total output regulation over line, load and temperature ? adjust pin current max 90 a over temperature ? output current in excess of 1 a ? line regulation typical 0.015%. ? load regulation typical 0.05%. ? fixed/adjustable output voltage ? to-220, to-263, to-252& sot-223 package t parameter symbol maximum units input voltage v in 7 v power dissipation p d internally limited w thermal resistance junction to case jc 2.5 thermal resistance junction to ambient ja 50 operating junction temperature range t j 0 to 125 o c / w storage temperature range t stg -65 to 150 lead temperature (soldering) 10 sec. t lead 260 o c features ordering infromation device operating temperature package pj1117cz-xx to-220 pj1117cm-xx to-263 pj1117cw-xx sot-223 pj1117cp-xx -20 to +85 o c to-252 note: xx is output voltage available for adj/1.5v/1.8v/2.5v/2.85v/3.3v/5.0v contact factory for additional voltage option. absolute maximum rating to-220 pin: 1.adj (com) 2.out 3.in block diagram
pj1117 1 amp low dropout positive voltage regulator 2-6 2003/03.rev.b unless otherwise specified, adjust v in = 2.75v to 7v and adjust io = 10ma to 1.0a fixed v in = 4.75v to 7v and fixed io = 10ma to 1.0a (for fixed 5.0v output version ,v in = 6.5v to 7v ) test conditions test limits parameter symbol v in -v out i o t j (4) min typ max units 5v 10ma 25 0.99 | vo | 1.01 | vo | output voltage (1) fixed voltage vo 1a over temp. 0.98 | vo | vo 1.02 | vo | 5v 10ma 25 1.238 1.262 reference voltage (1) adj voltage v ref 1a over temp. 1.225 1.250 1.275 v 25 0.015 line regulation (1) reg (line) 10ma over temp. 0.035 0.2 25 0.1 0.3 load regulation (1) reg (load) 5v over temp. 0.2 0.5 % 25 1 dropout voltage v ref =1% v d 1.1 1.3 v current limitx ic l 1.0 1.1 a quiescent current fixed model i q 5v 12 14 ma temperature coefficient tc over temp. 0.005 / 25 55 adjust pin current i adj 120 adjust pin current change i adj 0.2 5 a temperature stability ts 5v 0.5 % minimum load current adjust model io 5v over temp. 5 14 ma rms output noise (2) v n 25 0.003 %vo ripple rejection ratio (3) r a 5v over temp. 60 72 db (1)low duty cycle pulse testing with kelvin connections required. (2)bandwidth of 10hz to 10khz. (3)120hz input ripple (c adj for adj) =25 f . (4)over temp.-over specified operating junction temperature range. electrical characteristics
pj1117 1 amp low dropout positive voltage regulator 3-6 2003/03.rev.b (1) c1 needed if device is far from filter capacitors (2) c2 required for stability (1) c1 needed if device is far from filter capacitors (2) c2 required for stability electrical characteristics
pj1117 1 amp low dropout positive voltage regulator 4-6 2003/03.rev.b
pj1117 1 amp low dropout positive voltage regulator 5-6 2003/03.rev.b to-220 unit mm i j h e g f d c b a m n o l k p to-220 dimension millimeters inches dim min max min max a 10.000 10.500 0.394 0.413 b 3.240 4.440 0.128 0.175 c 2.440 2.940 0.096 0.116 d - 6.350 - 0.250 e 0.381 1.106 0.015 0.040 f 2.345 2.715 0.092 0.058 g 4.690 5.430 0.092 0.107 h 12.700 14.732 0.500 0.581 i 8.382 9.017 0.330 0.355 j 14.224 16.510 0.560 0.650 k 3.556 4.826 0.140 0.190 l 0.508 1.397 0.020 0.055 m 27.700 29.620 1.060 1.230 n 2.032 2.921 0.080 0.115 o 0.255 0.610 0.010 0.024 p 5.842 6.858 0.230 0.270 to-263 unit mm a d b c h g e f i to-263 dimension millimeters inches dim min max min max a 10.000 10.500 0.394 0.413 b 14.605 15.875 0.575 0.625 c 0.508 0.991 0.020 0.039 d 2.420 2.660 0.095 0.105 e 4.064 4.830 0.160 0.190 f 1.118 1.400 0.045 0.055 g 0.450 0.730 0.018 0.029 h 8.280 8.800 0.325 0.346 i 1.140 1.400 0.044 0.055 j 1.480 1.520 0.058 0.060
pj1117 1 amp low dropout positive voltage regulator 6-6 2003/03.rev.b to-252 unit mm b c d a f g i h e j to-252 dimension millimeters inches dim min max min max a 6.570 6.840 0.259 0.269 b 9.250 10.400 0.364 0.409 c 0.550 0.700 0.022 0.028 d 2.560 2.670 0.101 0.105 e 2.300 2.390 0.090 0.094 f 0.490 0.570 0.019 0.022 g 1.460 1.580 0.057 0.062 h 0.520 0.570 0.020 0.022 i 5.340 5.550 0.210 0.219 j 1.460 1.640 0.057 0.065 sot-223 unit mm g h e d f c a b j k i sot-223 dimension millimeters inches dim min max min max a 6.350 6.850 0.250 0.270 b 2.900 3.100 0.114 0.122 c 3.450 3.750 0.136 0.148 d 0.595 0.635 0.023 0.025 e 4.550 4.650 0.179 0.183 f 2.250 2.350 0.088 0.093 g 0.835 1.035 0.032 0.041 h 6.700 7.300 0.263 0.287 i 0.250 0.355 0.010 0.014 j 10 16 10 16 k 1.550 1.800 0.061 0.071
|
